Durafix is proud to distribute to New Zealand Industry, commercial and DIY
specialists the Market Leader in Air/Fuel soldering and brazing handheld torch
technology. USA designed self-lighting TurboTorch enables fast and efficient
ignition with regulated flame control. The exclusive Extreme swirl combustion
technology uses Acetylene/Air, LPG/Air or MAPP Gas/Air mixtures to generate
the hottest swirl combustion flame in the industry. Deal direct with the New
Zealand distributor Durafix and save.
We sell the following torches:
308160 TX-504 TurboTorch Extreme
308158 Pro-Line LPG Torch Kit
308157 Pro-Line Acetylene Torch Kit
 |
Product Description: 308160 TX-504 TurboTorch Extreme
$199.00
|
 TurboTorch®
dual fuel series, self-lighting Extreme® Hand Torches give HVAC/R and
plumbing professionals a performance edge with either Propane (blue) or
MAPP® (yellow) gas disposable bottles.
New Extreme Hand Torch tips reduce brazing time by up to 40 percent, increasing
operator efficiency & dramatically reducing labour costs. Extreme
tips increase weld time efficiency therefore minimizing Propane or Mapp
gas fuel consumption.
Durable & efficient Extreme Torches are designed with a rugged stainless
steel flame tube, built in filters & insulated ceramic wire holder
that withstands high heat. All leading design technology Extreme hand
torches come with a three-year replacement warranty.
- Built-in Piezo Lighter with Safety on/off Locking mechanism
- Designed for Disposable 20oz Propane or 16oz MAPP bottles
- Approx 2.5 hours burn time
- Adjustable flame control
- Auto on/off trigger action
- Stainless Tip Swivels 360° degrees
- Soft Solder: ¾" - 3" with Propane or ¼"
- 4" with MAPP
- Brazing 1/4" - 1" with Propane or ¼" - 1
¼" with MAPP
- Bronze-Braze Automotive panel steel with MAPP
- 3 Year Limited Warranty
|
|
Product Description: 308158 Pro-Line LPG Torch Kit
$329.00
|
 TurboTorch®
Extreme® LPG/Air kits mix atmospheric air with economical LPG. Thus
eliminating expensive specialist gas & hire bottles. Use standard BBQ
bottle.
TurboTorch® Pro-Line® series equipment performs faster & hotter
than any other LPG tips used for plumbing and brazing applications.
The exclusive Extreme swirl combustion technology uses LPG/air mixtures
to generate the hottest swirl combustion flame in the industry producing
30% more heat than competitor brands.
The TurboTorch® Pro-line® series of products give operators the
added convenience of a self-lighting torch feature and interchangeable torch
tips.
- Patented Swirl Flame design
- Detachable tip assembly for fast tip change
- All brass construction regulator
- Ergonomically designed handle means less strain on hand and wrist
while working
- CPL-5T Soft Solders 25-60mm, Silver Solders 15-35mm with LPG
- Smaller CPL-4T and CPL-3T tips available on request ($115.00 each)
|
|
Product Description: 308157 Pro-Line Acetylene Torch Kit
$329.00
|
 TurboTorch®
Extreme® Self-lighting Acetylene/Air Kits significantly reduce operating
costs by mixing acetylene with atmospheric air. Thus eliminating expensive
oxygen gas & hire bottle. Kit includes regulator/gauge, 3.6m Hose, ergonomic
handle with tap, self lighting detachable tip for ease of change to a smaller
tip.
TurboTorch Extreme Tips get hotter & perform faster than any other tips
used for plumbing and HVAC/R applications. The exclusive Extreme swirl combustion
technology uses acetylene/air mixtures to generate the hottest swirl combustion
flame in the industry.
- Gas Flow 9.7 CU FT/HR 4.6 LPM
- Soft Solder 40 - 75mm
- Silver Solder 20 - 40mm
- Bronze-Braze Auto Panel steel
- Patented swirl flame for max heat transfer - resists flame blow out
and delivers hottest, most efficient flame - cuts brazing time by 40 %
- Smaller CPL-5a & CPL-8A self lighting tips available (reduces
LPM gas flow and has more defined tip)
- Quick disconnect fitting for speed and ease of changing tips
|
|
